Short Review for Design and Implementation of a New Low-Cost Prototype Portable Smart Ventilator

Authors

  • Shereen Q. Blais Electrical Engineering Technical College, Middle Technical University, Baghdad, Iraq.
  • Jameel K. Abed Electrical Engineering Technical College, Middle Technical University, Baghdad, Iraq.
  • Mohannad J. Mnati Institute of Technology / Baghdad, Middle Technical University, Baghdad, Iraq
  • Tareq S. El-Hasan Electrical Engineering Department, Zarqa University, Zqrqa 13132, Jordan

DOI:

https://doi.org/10.51173/jt.v5i2.945

Keywords:

Ventilator, Portable, COVID-19, Respiratory, Smart

Abstract

This paper presents a set of research and an overview of the stages of development of the ventilator. The results of this research show how to produce a portable, smart, easy-to-manufacture and use device that can be developed at the lowest costs. Mechanical ventilation has become a lifesaver, especially during the outbreak of the Coronavirus COVID-19 where the patient needs continuous ventilation in order to help the respiratory system to perform its functions correctly due to the accumulation of fluid in the lungs resulting from viruses that infect the respiratory system, thus improving survival.

Downloads

Download data is not yet available.

Author Biographies

Shereen Q. Blais, Electrical Engineering Technical College, Middle Technical University, Baghdad, Iraq.

  

Tareq S. El-Hasan, Electrical Engineering Department, Zarqa University, Zqrqa 13132, Jordan

  

References

V. Jadav, N. Machhi, D. Biawat, R. Das, J. Mali, and B. E. Student, “Review for Arduino based Portable Ventilator for COVID-19,” 2022. [Online]. Available: www.ijcrt.org

S. Thitirattanapong and C. Pintavirooj, “Low-Cost Blower-Based Ventilator,” 2021. doi: 10.1109/BMEiCON53485.2021.9745235.

M. Instrumentation and T. Engineering, “Low Cost Portable Ventilator for covid-19,” pp. 1–14.

M. E. Awad, A. M. El-Garhy, M. A. Eldosoky, and A. M. Soliman, “Modeling and Simulation of Respiratory System for Acute Respiratory Distress Syndrome (ARDS) Associated with COVID-19,” in National Radio Science Conference, NRSC, Proceedings, Jul. 2021, vol. 2021-July, pp. 232–242. doi: 10.1109/NRSC52299.2021.9509828.

R. M. Corey et al., “Low-Complexity System and Algorithm for an Emergency Ventilator Sensor and Alarm,” IEEE Trans. Biomed. Circuits Syst., vol. 14, no. 5, pp. 1088–1096, Oct. 2020, doi: 10.1109/TBCAS.2020.3020702.

A. Christou, M. Ntagios, A. Hart, and R. Dahiya, “GlasVent—The Rapidly Deployable Emergency Ventilator,” Glob. Challenges, vol. 4, no. 12, p. 2000046, Dec. 2020, doi: 10.1002/gch2.202000046.

S. Srinivasan et al., “Individualized System for Augmenting Ventilator Efficacy (iSAVE): A Rapidly deployable system to expand ventilator capacity”, doi: 10.1101/2020.03.28.012617.

R. Kordulasiński et al., “A novel system for patient ventilation and dosing of hyperpolarized 3he for magnetic resonance imaging of human lungs,” Appl. Sci., vol. 10, no. 9, May 2020, doi: 10.3390/app10093163.

V. Gusti et al., “The COSMIC Bubble Helmet: A Non-Invasive Positive Pressure Ventilation System for COVID-19,” IEEE Open J. Eng. Med. Biol., vol. 1, pp. 312–315, 2020, doi: 10.1109/OJEMB.2020.3036742.

A. Chharia, S. Chauhan, S. Basak, and B. Sharma, “NeT-Vent: Low-Cost, Rapidly Scalable and IoT-enabled Smart Invasive Mechanical Ventilator with adaptive control to reduce incidences of Pulmonary Barotrauma in SARS-CoV-2 patients,” Oct. 2021. doi: 10.1109/GCAT52182.2021.9587553.

E. J. Pristianto et al., “High-Flow and High-Pressure Oxygen Mixing for Ventilator System,” in Proceeding - 2021 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications: Managing the Impact of Covid-19 Pandemic: Together Facing Challenges Through Electronics and ICTs, ICRAMET 2021, 2021, pp. 201–204. doi: 10.1109/ICRAMET53537.2021.9650464.

M. F. Radzi, H. M. Saputra, C. H. A. H. B. Baskoro, M. Mirdanies, R. I. A. Aziz, and N. Ismail, “PID-Based Fraction of Inspired Oxygen (FiO2) Control System in ICU Ventilator,” in 2021 IEEE 7th International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2021, Aug. 2021, pp. 185–189. doi: 10.1109/ICSIMA50015.2021.9525942.

M. Barrow, F. Restuccia, M. Gobulukoglu, E. Rossi, and R. Kastner, “A Remote Control System for Emergency Ventilators during SARS-CoV-2,” IEEE Embed. Syst. Lett., vol. 14, no. 1, pp. 43–46, Mar. 2022, doi: 10.1109/LES.2021.3107837.

H. Seddik and A. M. Eldeib, “A wireless real-time remote control and tele-monitoring system for mechanical ventilators,” in 2016 8th Cairo International Biomedical Engineering Conference, CIBEC 2016, Jan. 2017, pp. 64–67. doi: 10.1109/CIBEC.2016.7836121.

A. I. Abboudi, A. I. Alhammadi, K. M. Albastaki, N. U. M. Khanum, and A. Jarndal, “Design and Implementation of Portable Emergency Ventilator for COVID-19 Patients,” 2022. doi: 10.1109/ASET53988.2022.9734315.

S.-Y. Lu et al., “Design and Study of a Portable High-frequency Ventilator for Clinical Applications,” 2019. doi: 10.0/Linux-x86_64.

M. R. Islam, M. M. Islam, M. Ahmad, S. Farid, U. Ahmed, and M. S. Hossain, “Designing an Electro-Mechanical Ventilator Based on Double CAM Integration Mechanism,” 2019.

J. Santivanez et al., “Pressure and Volume Control in a new Emergency Mechanical Ventilator based on PLC and Industrial Pneumatic Parts in Peru,” in Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2021, pp. 5566–5569. doi: 10.1109/EMBC46164.2021.9630493.

E. S. Haq, D. Suwardiyanto, E. M. Rini, R. Sigit, and S. P. Kristanto, “Mechanical Ventilator Control System Using Low-Cost Pressure Sensors,” in 2021 International Conference on Computer Science, Information Technology, and Electrical Engineering, ICOMITEE 2021, 2021, pp. 202–208. doi: 10.1109/ICOMITEE53461.2021.9650259.

L. Acho, A. N. Vargas, and G. Pujol-Vázquez, “Low-Cost, open-source mechanical ventilator with pulmonary monitoring for COVID-19 patients,” Actuators, vol. 9, no. 3, pp. 1–14, 2020, doi: 10.3390/act9030084.

A. S. Tran, H. Q. Thinh Ngo, V. K. Dong, and A. H. Vo, “Design, Control, Modeling, and Simulation of Mechanical Ventilator for Respiratory Support,” Math. Probl. Eng., vol. 2021, 2021, doi: 10.1155/2021/2499804.

R. Kiruthika, E. Ramya, R. Prabha, M. Harinarayanan, S. Divakaran, and R. Iswariya, “IOT Based Patient Monitoring System,” 8th Int. Conf. Adv. Comput. Commun. Syst. ICACCS 2022, no. May, pp. 165–168, 2022, doi: 10.1109/ICACCS54159.2022.9785191.

M. A. Al Rakib, M. M. Rahman, M. Samad, S. Islam, M. A. Rahman, and F. I. Abbas, “Low-Cost Pulmonary Ventilator for Patient Monitoring for Covid-19 Disease,” Eur. J. Eng. Technol. Res., vol. 6, no. 6, pp. 154–159, 2021, doi: 10.24018/ejeng.2021.6.6.2610.

A. V. Radogna, P. A. Siciliano, S. Sabina, E. Sabato, and S. Capone, “A low-cost breath analyzer module in domiciliary non-invasive mechanical ventilation for remote copd patient monitoring,” Sensors (Switzerland), vol. 20, no. 3, 2020, doi: 10.3390/s20030653.

E. D. Dijemeni and R. Dickinson, “Portable mobile real time oxygen monitoring auto-ventilation system,” 2013 E-Health Bioeng. Conf. EHB 2013, pp. 98–101, 2013, doi: 10.1109/EHB.2013.6707383.

P. N. D. Prof. Olfa Kanoun, Advanced Systems for Biomedical Applications, vol. 39. 2021. [Online]. Available: http://link.springer.com/book/10.1007/978-3-030-71221-1

S. Jawad et al., “Since January 2020 Elsevier has created a COVID-19 resource centre with free information in English and Mandarin on the novel coronavirus COVID-19 . The COVID-19 resource centre is hosted on Elsevier Connect , the company ’ s public news and information.,” Psychiatry Res., vol. 14(4), no. January, p. 293, 2020.

M. Ramos, R. O. Giambastiani, D. R. Eng, M. F. Biancolini, and I. Lugones, “Electronic computer-based model of combined ventilation using a new medical device,” Rev. Chil. Anest., vol. 51, no. 4, pp. 404–413, 2022, doi: 10.25237/revchilanestv5111051509.

V. Ticllacuri, S. Ibarra, K. Zumaeta, E. Torres, M. Mendoza, and A. Flores, “Development of a Simulation Software Algorithm for High-End Mechanical Ventilators with Functionalities to attend COVID-19 Patients,” Annu. Int. Conf. IEEE Eng. Med. Biol. Soc. IEEE Eng. Med. Biol. Soc. Annu. Int. Conf., vol. 2022, pp. 986–990, 2022, doi: 10.1109/EMBC48229.2022.9871245.

N. A. Rodriguez-Olivares, L. Nava-Balanzar, and L. Barriga-Rodriguez, “Differential Pressure Spirometry for Mechanical Ventilation Using Dichotomic Search,” IEEE Trans. Instrum. Meas., vol. 70, pp. 1–10, 2021, doi: 10.1109/TIM.2021.3116307.

Smart monitor of pacemaker patient by using IoT cloud in real time JK Abed, HM Abed Indonesian Journal of Electrical Engineering and Computer Science 18.

Real Time Pacemaker Patient Monitoring System Based on Internet of Things HM Abdul-jabbar, JK Abed IOP Conference Series: Materials Science and Engineering 745 (1), 012093.

ECG Biometric Verification by using PCA NNA Asst. Prof. Dr. Jameel Kadhim Abed #1 International Journal of Engineering Trends and Technology 65 (1).

Design and implementation of pulse rate monitoring over internet using thingSpeak and ESP8266 AS Hatem, JK Abed, AR Ajel 2022 Second International Conference on Advances in Electrical, Computing

A revisit of the Internet of Things for Healthcare Applications JK Abed Technology Reports of Kansia University 62 (04), 45-56.

ISAVE ventilator device

Downloads

Published

2023-06-30

How to Cite

Shereen Q. Blais, Jameel K. Abed, Mohannad J. Mnati, & Tareq S. El-Hasan. (2023). Short Review for Design and Implementation of a New Low-Cost Prototype Portable Smart Ventilator. Journal of Techniques, 5(2), 32–38. https://doi.org/10.51173/jt.v5i2.945

Issue

Section

Engineering