Subtractive and Additive Technologies in Fixed Dental Restoration: A Systematic Review

Rafal Kareem Rasheed; Nidhal Sahib Mansoor; Nihad Hasan Mohammed; Syed Saad B Qasim

doi:10.51173/jt.v5i4.1034

Authors

Rafal Kareem Rasheed College of Health & Medical Technology - Baghdad, Middle Technical University, Baghdad, Iraq
Nidhal Sahib Mansoor College of Health & Medical Technology - Baghdad, Middle Technical University, Baghdad, Iraq
Nihad Hasan Mohammed College of Health & Medical Technology - Baghdad, Middle Technical University, Baghdad, Iraq
Syed Saad B Qasim Faculty of Dentistry, Kuwait University, Safat 13110, Kuwait

DOI:

https://doi.org/10.51173/jt.v5i4.1034

Keywords:

Subtractive Technology, Additive Manufacturing, Fixed Dental Restoration

Abstract

Today, computers and digital devices are an indispensable part of our daily lives, and dentistry is no exception. Dentistry has adopted a number of digital technologies, including CAD/CAM (computer-aided design and manufacturing) systems. The goal of the current study is to evaluate the current state of knowledge on dental alloy manufacturing using subtractive and additive techniques for metal ceramic restoration. On this topic, an electronic systematic review was conducted in various databases (Science Direct, PubMed, Web of Science, and Google Scholar searches), as well as a hand search of the scientific literature. Published work was collected, analyzed, and relevant articles were chosen for inclusion in this review from 2008 to 2021. The online databases were searched for articles published that appeared between 2008 and 2021, with no time or language constraints we grouped relevant search terms together, such as "Computer-Aided Design, CAD/CAM, dentistry, dental fabrication, restoration, additive manufacturing." We recognized publications individually and systematically screened titles, summaries, and complete texts of the obtained publications. The findings indicate that current knowledge is sufficient to recommend subtractive manufacturing for crowns and fixed dental restorations for routine clinical use, with improvements in each of the current metal-ceramic veneering materials and procedures. According to the review, several digital technologies, such as systems of computer aided design and aided manufacturing were used in different dental specialties. Application of CAD/CAM technology provided numerous benefits while posing few limitations.

Downloads

Download data is not yet available.

Author Biography

Syed Saad B Qasim, Faculty of Dentistry, Kuwait University, Safat 13110, Kuwait

Department of Bio Clinical Sciences

References

Y. S. Al Jabbari, "Physico-mechanical properties and prosthodontic applications of Co-Cr dental alloys: a review of the literature," The journal of advanced prosthodontics, vol. 6, pp. 138-145, 2014, https://doi.org/10.4047/jap.2014.6.2.138.

Y.-J. Choi, J.-Y. Koak, S.-J. Heo, S.-K. Kim, J.-S. Ahn, and D.-S. Park, "Comparison of the mechanical properties and microstructures of fractured surface for Co-Cr alloy fabricated by conventional cast, 3-D printing laser-sintered and CAD/CAM milled techniques," The Journal of Korean Academy of Prosthodontics, vol. 52, pp. 67-73, 2014, https://doi.org/10.4047/jkap.2014.52.2.67.

Beuer, Florian, Josef Schweiger, and Daniel Edelhoff. "Digital dentistry: an overview of recent developments for CAD/CAM generated restorations." British dental journal, 204, 9, 505-511, 2008, https://doi.org/10.1038/sj.bdj.2008.350.

T. Miyazaki and Y. Hotta, "CAD/CAM systems available for the fabrication of crown and bridge restorations," Australian dental journal, vol. 56, pp. 97-106, 2011, https://doi.org/10.1111/j.1834-7819.2010.01300.x.

J. Tinscherta, G. Nattb, S. Hassenpflugb, and H. Spiekermanna, "Status of Current CAD/CAM Technology in Dental Medicine Stand der aktuellen CAD/CAM-Technik in der Zahnmedizin," Int. J. Comput. Dent, vol. 7, pp. 25-45, 2004.

K. Aslam and R. Nadim, "A review on cad cam in dentistry," JPDA, vol. 24, p. 112, 2015.

M. Revilla-León and M. Özcan, "Additive manufacturing technologies used for 3D metal printing in dentistry," Current Oral Health Reports, vol. 4, pp. 201-208, 2017, https://doi.org/10.1007/s40496-017-0152-0.

A. International, "ASTM committee F42 on additive manufacturing technologies," ed: ASTM International West Conshohocken, PA, USA, 2012.

G. Uzun, "An overview of dental CAD/CAM systems," Biotechnology & Biotechnological Equipment, vol. 22, pp. 530-535, 2008.

G. Davidowitz and P. G. Kotick, "The use of CAD/CAM in dentistry," Dental Clinics, vol. 55, pp. 559-570, 2011, https://doi.org/10.1016/j.cden.2011.02.011.

A. CEREC, "CAD/CAM for everyone [pamphlet]," Charlotte (NC): Sirona.

N. S. Birnbaum, H. B. Aaronson, C. Stevens, and B. Cohen, "3D digital scanners: a high-tech approach to more accurate dental impressions," Inside Dentistry, 5 (4), pp. 70-4, 2009.

M. Salmi, "Additive manufacturing processes in medical applications," Materials, vol. 14, p. 191, 2021, https://doi.org/10.3390/ma14010191.

R. Singh, A. Gupta, O. Tripathi, S. Srivastava, B. Singh, A. Awasthi, et al., "Powder bed fusion process in additive manufacturing: An overview," Materials Today: Proceedings, vol. 26, pp. 3058-3070, 2020, https://doi.org/10.1016/j.matpr.2020.02.635.

G. Stano and G. Percoco, "Additive manufacturing aimed to soft robots fabrication: A review," Extreme Mechanics Letters, vol. 42, p. 101079, 2021, https://doi.org/10.1016/j.eml.2020.101079.

Y. Lakhdar, C. Tuck, J. Binner, A. Terry, and R. Goodridge, "Additive manufacturing of advanced ceramic materials," Progress in Materials Science, vol. 116, p. 100736, 2021, https://doi.org/10.1016/j.pmatsci.2020.100736.

I. Gibson, D. W. Rosen, B. Stucker, M. Khorasani, D. Rosen, B. Stucker, et al., Additive manufacturing technologies vol. 17: Springer, 2021.

J. L. Bartlett and X. Li, "An overview of residual stresses in metal powder bed fusion," Additive Manufacturing, vol. 27, pp. 131-149, 2019, https://doi.org/10.1016/j.addma.2019.02.020.

A. Nouri, A. R. Shirvan, Y. Li, and C. Wen, "Additive manufacturing of metallic and polymeric load-bearing biomaterials using laser powder bed fusion: A review," Journal of Materials Science & Technology, vol. 94, pp. 196-215, 2021, https://doi.org/10.1016/j.jmst.2021.03.058.

S. Singh, V. Sharma, and A. Sachdeva, "Progress in selective laser sintering using metallic powders: a review," Materials Science and Technology, vol. 32, pp. 760-772, 2016, https://doi.org/10.1179/1743284715Y.0000000136.

S. F. S. Shirazi, S. Gharehkhani, M. Mehrali, H. Yarmand, H. S. C. Metselaar, N. A. Kadri, et al., "A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing," Science and technology of advanced materials, vol. 16, p. 033502, 2015, https://doi.org/10.1088/1468-6996/16/3/033502.

A. Awad, F. Fina, A. Goyanes, S. Gaisford, and A. W. Basit, "3D printing: Principles and pharmaceutical applications of selective laser sintering," International Journal of Pharmaceutics, vol. 586, p. 119594, 2020, https://doi.org/10.1016/j.ijpharm.2020.119594.

A. Nouri and A. Sola, "Electron beam melting in biomedical manufacturing," in Metallic Biomaterials Processing and Medical Device Manufacturing, ed: Elsevier, 2020, pp. 271-314, https://doi.org/10.1016/B978-0-08-102965-7.00008-4.

A. Tarancón and V. Esposito, 3D Printing for Energy Applications: Wiley Online Library, 2021.

J. G. R. Sereni, "Reference module in materials science and materials engineering," 2016.

A. Baroutaji, K. Bryan, M. Sajjia, and S. Lenihan, "Reference Module in Materials Science and Materials Engineering," ed: Go to reference in article, 2017.

M. Mohammadi and H. Asgari, "Achieving low surface roughness AlSi10Mg_200C parts using direct metal laser sintering," Additive Manufacturing, vol. 20, pp. 23-32, 2018, https://doi.org/10.1016/j.addma.2017.12.012.

F. L. Garcia, V. A. da Silva Moris, A. O. Nunes, and D. A. L. Silva, "Environmental performance of additive manufacturing process–an overview," Rapid Prototyping Journal, vol. 24, pp. 1166-1177, 2018, https://doi.org/10.1108/RPJ-05-2017-0108.

O. D. Neikov and N. Yefimov, Handbook of non-ferrous metal powders: technologies and applications: Elsevier, 2009.

O. Alageel, B. Wazirian, B. Almufleh, and F. Tamimi, "Fabrication of dental restorations using digital technologies: techniques and materials," Digital Restorative Dentistry, pp. 55-91, 2019, https://doi.org/10.1007/978-3-030-15974-0_4.

T. M. Wischeropp, H. Tarhini, and C. Emmelmann, "Influence of laser beam profile on the selective laser melting process of AlSi10Mg," Journal of Laser Applications, vol. 32, p. 022059, 2020, https://doi.org/10.2351/7.0000100.

H. Tiismus, A. Kallaste, A. Belahcen, M. Tarraste, T. Vaimann, A. Rassõlkin, et al., "AC magnetic loss reduction of SLM processed Fe-Si for additive manufacturing of electrical machines," Energies, vol. 14, p. 1241, 2021, https://doi.org/10.3390/en14051241.

T. D. Ngo, A. Kashani, G. Imbalzano, K. T. Nguyen, and D. Hui, "Additive manufacturing (3D printing): A review of materials, methods, applications and challenges," Composites Part B: Engineering, vol. 143, pp. 172-196, 2018, https://doi.org/10.1016/j.compositesb.2018.02.012.

L. Dobrzanski, A. Dobrzanska-Danikiewicz, A. Achtelik-Franczak, L. B. Dobrzański, M. Szindler, and T. Gaweł, "Porous Selective Laser Melted Ti and Ti6Al4V Materials for Medical Applications, 2017

P. Svanborg and L. Hjalmarsson, "A systematic review on the accuracy of manufacturing techniques for cobalt chromium fixed dental prostheses," Biomaterial investigations in dentistry, vol. 7, pp. 31-40, 2020, https://doi.org/10.1080/26415275.2020.1714445.

T. Miyazaki, Y. Hotta, J. Kunii, S. Kuriyama, and Y. Tamaki, "A review of dental CAD/CAM: current status and future perspectives from 20 years of experience," Dental materials journal, vol. 28, pp. 44-56, 2009, https://doi.org/10.4012/dmj.28.44.

B. Konieczny, A. Szczesio-Wlodarczyk, J. Sokolowski, and K. Bociong, "Challenges of Co–Cr alloy additive manufacturing methods in dentistry—the current state of knowledge (systematic review)," Materials, vol. 13, p. 3524, 2020, https://doi.org/10.3390/ma13163524.

S. Ayyıldız, E. H. Soylu, S. İde, S. Kılıç, C. Sipahi, B. Pişkin, et al., "Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness," The Journal of Advanced Prosthodontics, vol. 5, pp. 471-478, 2013, http://dx.doi.org/10.4047/jap.2013.5.4.471.

H. Hesse and M. Özcan, "A review on current additive manufacturing technologies and materials used for fabrication of metal-ceramic fixed dental prosthesis," Journal of Adhesion Science and Technology, vol. 35, pp. 2529-2546, 2021, https://doi.org/10.1080/01694243.2021.1899699.

M. Despeisse and T. Minshall, "Skills and education for additive manufacturing: a review of emerging issues," in IFIP International Conference on Advances in Production Management Systems, 2017, pp. 289-297, https://doi.org/10.1007/978-3-319-66923-6_34.

Z. Liu, C. Li, X. Fang, and Y. Guo, "Energy consumption in additive manufacturing of metal parts," Procedia Manufacturing, vol. 26, pp. 834-845, 2018, https://doi.org/10.1016/j.promfg.2018.07.104.