Effect of Optiglaze Color on Wear Resistance of Heat Cure Acrylic Prosthesis

Najwah Yousuf Hameed; Atyaf Mseer  Naser; Maha Kareem  Jabbar

doi:10.51173/jt.v4i2.430

Authors

Najwah Yousuf Hameed College of Health and Medical Techniques - Baghdad, Middle Technical University, Baghdad, Iraq.
Atyaf Mseer Naser College of Health and Medical Techniques - Baghdad, Middle Technical University, Baghdad, Iraq.
Maha Kareem Jabbar College of Health and Medical Techniques - Baghdad, Middle Technical University, Baghdad, Iraq.

DOI:

https://doi.org/10.51173/jt.v4i2.430

Keywords:

Optiglaze Color, Wear Resistance

Abstract

Statement of problem: The heat cure denture base material's wear resistance. Purpose: The goal of the research was to determine the wear resistance of heat-cured acrylic denture base material after covering it with a light-polymerized glaze. Material and methods. Thirty acrylic resin specimens were divided into three groups depending on the tests, each group consisting of ten specimens (A) control group was unprocessed, group (B) was surface processed with Optiglaze color materials after finishing and polishing, and group (C) specimens were surfaces treated with Optiglaze color materials after finishing but not polishing. The difference in weights before and after the wear test was used to compute the weight loss of each specimen. SPSS version 20 was employed to do a statistical analysis of the data collected. Results: The results of this study show the higher mean values for wear resistance were registered by the (C) group which was 8.7418, followed by the (B) group which was7.3235, while the lowest mean value was related to the (A) group which was7.0883. Conclusions: When compared to group A, there was no statistically significant wear value in heat cure acrylic resin specimens covered with Optiglaze group (C).Clinical implications: This research will help us learn more about surface glazed heat cure acrylic resin denture materials and how they might increase wear resistance. This study will aid dental professionals and technicians in choosing the best polishing and coating material for dentures.

Downloads

Download data is not yet available.

References

T. Nejatian, A. Johnson, and R. Van Noort, "Reinforcement of denture base resin," in Advances in Science and Technology, 2006, pp. 124-129.

R. Alla, K. Raghavendra, R. Vyas, and A. Konakanchi, "Conventional and contemporary polymers for the fabrication of denture prosthesis: part I–overview, composition and properties," Int J Appl Dent Sci, vol. 1, pp. 82-89, 2015.

M. Santos, S. Soo, and H. Petridis, "The effect of Parylene coating on the surface roughness of PMMA after brushing," Journal of dentistry, vol. 41, pp. 802-808, 2013.

P. K. Vallittu, P. Alakuijala, V. P. Lassila, and R. Lappalainen, "In vitro fatigue fracture of an acrylic resin-based partial denture: an exploratory study," The Journal of prosthetic dentistry, vol. 72, pp. 289-295, 1994.

T. R. Meng and M. A. Latta, "Physical properties of four acrylic denture base resins," J Contemp Dent Pract, vol. 6, pp. 93-100, 2005.

J. Emmanouil, P. Kavouras, and T. Kehagias, "The effect of photo-activated glazes on the microhardness of acrylic baseplate resins," Journal of dentistry, vol. 30, pp. 7-10, 2002.

O. Sahin, A. Koroglu, D. Ö. Dede, and B. Yilmaz, "Effect of surface sealant agents on the surface roughness and color stability of denture base materials," The Journal of prosthetic dentistry, vol. 116, pp. 610-616, 2016.

E. Emami, M. Kabawat, P. H. Rompre, and J. S. Feine, "Linking evidence to treatment for denture stomatitis: a meta-analysis of randomized controlled trials," Journal of dentistry, vol. 42, pp. 99-106, 2014.

R. M. Basker, J. C. Davenport, and J. M. Thomason, Prosthetic treatment of the edentulous patient: John Wiley & Sons, 2011.

N. Tekçe, S. Fidan, S. Tuncer, D. Kara, and M. Demirci, "The effect of glazing and aging on the surface properties of CAD/CAM resin blocks," The journal of advanced prosthodontics, vol. 10, pp. 50-57, 2018.

J. J. E. Choi, C. E. Uy, R. S. Ramani, and J. N. Waddell, "Evaluation of surface roughness, hardness and elastic modulus of nanoparticle containing light-polymerized denture glaze materials," journal of the mechanical behavior of biomedical materials, vol. 103, p. 103601, 2020.

I. J. Ismaeel and H. K. Alalwan, "The effect of the addition of silanated poly propylene fiber to polymethylmethacrylate denture base material on some of its mechanical properties," Journal of Baghdad college of dentistry, vol. 325, pp. 1-17, 2015.

N. Sesma, D. C. Laganá, S. Morimoto, and C. Gil, "Effect of denture surface glazing on denture plaque formation," Brazilian Dental Journal, vol. 16, pp. 129-134, 2005.

M. Kuhar and N. Funduk, "Effects of polishing techniques on the surface roughness of acrylic denture base resins," The Journal of prosthetic dentistry, vol. 93, pp. 76-85, 2005.

P. G. Doray, M. S. Eldiwany, and J. M. Powers, "Effect of resin surface sealers on improvement of stain resistance for a composite provisional material," Journal of Esthetic and Restorative Dentistry, vol. 15, pp. 244-250, 2003.

H. Z. Yew, "Colour changes in nano-filled and micro-hybrid composite resins on exposure to spices," 2012.

O. Şahin, D. Ö. Dede, A. Köroğlu, and B. Yılmaz, "Influence of surface sealant agents on the surface roughness and color stability of artificial teeth," The Journal of prosthetic dentistry, vol. 114, pp. 130-137, 2015.

W.-s. Oh, R. DeLong, and K. J. Anusavice, "Factors affecting enamel and ceramic wear: a literature review," The Journal of prosthetic dentistry, vol. 87, pp. 451-459, 2002.

D. Ö. Dede, O. Şahin, A. Koroglu, and B. Yilmaz, "Effect of sealant agents on the color stability and surface roughness of nanohybrid composite resins," The Journal of prosthetic dentistry, vol. 116, pp. 119-128, 2016.

B. Zimmerli, T. Koch, S. Flury, and A. Lussi, "The influence of toothbrushing and coffee staining on different composite surface coatings," Clinical oral investigations, vol. 16, pp. 469-479, 2012.

L. Roeder, W. Tate, and J. Powers, "Effect of finishing and polishing procedures on the surface roughness of packable composites," Operative dentistry, vol. 25, pp. 534-543, 2000.

R. V. D. R. Silva, M. I. Costa, I. C. Jarros, A. A. Del Bel Cury, S. K. Sidhu, M. Negri, et al., "Effect of Silicon dioxide coating of acrylic resin surfaces on Candida albicans adhesion," Brazilian Oral Research, vol. 34, 2020.

B. A. Kaplan, G. R. Goldstein, T. Vijayaraghavan, and I. K. Nelson, "The effect of three polishing systems on the surface roughness of four hybrid composites: a profilometric and scanning electron microscopy study," The Journal of prosthetic dentistry, vol. 76, pp. 34-38, 1996.

C. d. R. Perez, R. Hirata Jr, A. Silva, E. Sampaio, and M. Miranda, "Effect of a glaze/composite sealant on the 3-D surface roughness of esthetic restorative materials," Operative Dentistry, vol. 34, pp. 674-680, 2009.