A Review on Woven Carbon Fiber-Reinforced Epoxy Composites: Processing Methods and Mechanical Enhancement
DOI:
https://doi.org/10.51173/jt.v7i1.2670Keywords:
Composite Structure, Core Structure, Woven Carbon Fiber, Mechanical PerformanceAbstract
Recently, epoxy resin-based composite structures have been widely used in many engineering applications due to their superior mechanical properties, thermal insulation and acoustic damping. However, to further improve the mechanical performance, several studies indicate significant benefits can be achieved using woven carbon fibers and different core material reinforcements for sandwich composite materials. The present review includes a comprehensive review of the most important composite material manufacturing techniques such as hand layup, spray layup, compression moulding, extrusion compound, filament winding, moulding injection, pultrusion, resin transfer moulding, and vacuum infusion or vacuum-assisted resin transfer, and the advantages of each method. In addition to the mechanical performance of epoxy composites and the possibility of improving these properties by using different strategies to enhance interfacial bonding and mechanical performance. These strategies include the incorporation of nanoparticles, surface modifications, the use of advanced resin systems, and a review of the latest studies in this field. Each approach aims to interaction improvement between carbon fibers and the epoxy matrix, thus enhancing properties such as tensile strength, compression strength, impact resistance, and interlaminar shear strength. To establish a systematic understanding of design criteria, this work intends to summarize all studies in the open literature about this topic. It is concluded that enhancing the mechanical performance of sandwich structural composites depends on the selection of the appropriate manufacturing method, which is determined by material properties, cost considerations, processing requirements, and specific applications.
Downloads
References
J. Xiong, L. Ma, A. Stocchi, J. Yang, L. Wu, and S. Pan, "Bending response of carbon fiber composite sandwich beams with three-dimensional honeycomb cores," Composite Structures, vol. 108, pp. 234-242, 2014.
N. K. Taieh, S. K. Khudhur, E. A. A. Fahad, Z. Zhou, and D. Hui, "High mechanical performance of 3-aminopropyl triethoxy silane/epoxy cured in a sandwich construction of 3D carbon felts foam and woven basalt fibers," Nanotechnology Reviews, vol. 12, no. 1, p. 20220519, 2023.
R. Burkhanova, N. Y. Evstafyeva, T. Akchurin, and I. Stefanenko, "Filling of Epoxy Polymers as a Factor of Obtaining a Multi-component Composition with Improved Strength Properties," in Proceedings of the 5th International Conference on Construction, Architecture and Technosphere Safety: ICCATS 2021, 2022: Springer, pp. 84-94.
H. Zhang, Z. Zhang, and C. Breidt, "Comparison of short carbon fibre surface treatments on epoxy composites: I. Enhancement of the mechanical properties," Composites science and technology, vol. 64, no. 13-14, pp. 2021-2029, 2004.
V. Nimbagal , "Mechanical and fracture properties of carbon nano fibers/short carbon fiber epoxy composites," Polymer Composites, vol. 44, no. 7, pp. 3977-3989, 2023.
T. Huang, Y. Wang, and G. Wang, "Review of the mechanical properties of a 3D woven composite and its applications," Polymer-Plastics Technology and Engineering, vol. 57, no. 8, pp. 740-756, 2018.
H. Aisyah, "Effects of fabric counts and weave designs on the properties of laminated woven kenaf/carbon fibre reinforced epoxy hybrid composites," Polymers, vol. 10, no. 12, p. 1320, 2018.
C. Wang, "Low-velocity impact response of 3D woven hybrid epoxy composites with carbon and heterocyclic aramid fibres," Polymer Testing, vol. 101, p. 107314, 2021.
Q. Huang, "Free vibration analysis of carbon-fiber plain woven reinforced composite conical-cylindrical shell under thermal environment with general boundary conditions," Composite Structures, vol. 322, p. 117340, 2023.
M. Syduzzaman and K. Bilisik, "Properties of multi-walled carbon nanotubes grown three-dimensional (3D) woven carbon/epoxy multiscale composites: Experimental study," Materials Today Communications, p. 107907, 2023.
M. M. Ali, "Enhancing the Tribological Characteristics of Epoxy Composites by the Use of Three-Dimensional Carbon Fibers and Cobalt Oxide Nanowires," Journal of Techniques, vol. 6, no. 2, pp. 29-35, 2024.
M. Xu, B. Li, X. Li, Z. Fan, and D. Ren, "Study of the self-polymerization of epoxy/phthalonitrile copolymers and their high-performance fiber-reinforced laminates," Polymers, vol. 15, no. 17, p. 3516, 2023.
S. R. Laraba, "Development of sandwich using low-cost natural fibers: Alfa-Epoxy composite core and jute/metallic mesh-Epoxy hybrid skin composite," Industrial Crops and Products, vol. 184, p. 115093, 2022.
M. M. Ali, N. K. Taieh, H. A. Hussein, Y. Li, M. Jiang, and Z. Zhou, "Nanostructured Co3O4-graced 3D carbon felts for improved mechanical interlocking in epoxy composites: morphological and mechanical/tribological optimization," Journal of Materials Science, pp. 1-17, 2024.
D. Wang, "Effects of reactive diluent on processing, structure, and properties of epoxy foams and their sandwich composites," Polymer Engineering & Science, vol. 64, no. 5, pp. 2073-2081, 2024.
Y. Wang, "Epoxy composite with high thermal conductivity by constructing 3D-oriented carbon fiber and BN network structure," RSC advances, vol. 11, no. 41, pp. 25422-25430, 2021.
K. Shahapurkar, "Tensile, compressive, and fracture behavior of Habeshian chopped banana/epoxy core sandwich woven banana composite," Biomass Conversion and Biorefinery, pp. 1-12, 2024.
N. A. N. Nik Amrul Faaizol, M. Mustapha, N. A. Rejab, and H. Vahabi, "Multi-walled carbon nanotubes/woven glass/epoxy hybrid nanocomposites: Effect of fabrication methods and types of epoxy matrices," Journal of Reinforced Plastics and Composites, p. 07316844241252321, 2024.
H. Sharma, A. Kumar, S. Rana, and L. Guadagno, "An overview on carbon fiber-reinforced epoxy composites: Effect of graphene oxide incorporation on composites performance," Polymers, vol. 14, no. 8, p. 1548, 2022.
R. Wazalwar, M. Sahu, and A. M. Raichur, "Mechanical properties of aerospace epoxy composites reinforced with 2D nano-fillers: current status and road to industrialization," Nanoscale Advances, vol. 3, no. 10, pp. 2741-2776, 2021.
M. Ponnusamy, L. Natrayan, S. Kaliappan, G. Velmurugan, and S. Thanappan, "Effectiveness of nanosilica on enhancing the mechanical and microstructure properties of kenaf/carbon fiber-reinforced epoxy-based nanocomposites," Adsorption Science & Technology, vol. 2022, p. 4268314, 2022.
G. Suresh, "Evaluation of mechanical behaviour of carbon fiber reinforced nanoclay filled IPN matrix composite," Materials Research Express, vol. 6, no. 12, p. 125311, 2019.
Z. Sun, "Enhancing the mechanical and thermal properties of epoxy resin via blending with thermoplastic polysulfone," Polymers, vol. 11, no. 3, p. 461, 2019.
N. Kadhim, A. Zaman, M. Jiang, X. Yang, J. Qiu, and Z. Zhou, "A cast-in-place fabrication of high performance epoxy composites cured in an in-situ synthesized 3D foam of nanofibers," Composites Part B: Engineering, vol. 205, p. 108495, 2021.
M. M. Ali and S. C. Joshi, "Optimal layup schemes with selective dispersion of core/shell microparticles in ply interfaces of glass/epoxy composite laminates for low velocity impact," in Journal of Physics: Conference Series, 2019, vol. 1355, no. 1: IOP Publishing, p. 012042.
M. H. Zin, K. Abdan, N. Mazlan, E. S. Zainudin, K. E. Liew, and M. N. Norizan, "Automated spray up process for Pineapple Leaf Fibre hybrid biocomposites," Composites Part B: Engineering, vol. 177, p. 107306, 2019.
D. Corbridge, L. T. Harper, D. S. De Focatiis, and N. Warrior, "Compression moulding of composites with hybrid fibre architectures," Composites Part A: Applied Science and Manufacturing, vol. 95, pp. 87-99, 2017.
K. Oksman, M. Skrifvars, and J.-F. Selin, "Natural fibres as reinforcement in polylactic acid (PLA) composites," Composites science and technology, vol. 63, no. 9, pp. 1317-1324, 2003.
J. Thomason, "Interfacial strength in thermoplastic composites-at last an industry friendly measurement method?," Composites Part A: Applied Science and Manufacturing, vol. 33, no. 10, pp. 1283-1288, 2002.
K. Velde, "Van de, Kiekens, P," Composite Structures, vol. 54, pp. 355-360, 2001.
Z. Sun, "Preparation of high-performance carbon fiber-reinforced epoxy composites by compression resin transfer molding," Materials, vol. 12, no. 1, p. 13, 2018.
D. Saber, "Enhancement of barrier and mechanical performance of steel coated with epoxy filled with micron and nano alumina fillers," Materials Research, vol. 25, p. e20210413, 2021.
M. Li, C. Stokes-Griffin, and P. Compston, "Post-Forming of Carbon Fibre-Reinforced PEEK Thermoplastic Tubular Structures," Journal of Composites Science, vol. 8, no. 9, p. 335, 2024.
A. Al Mahmood, "Characterization of Glass Fibre Reinforced Polymer Composite Prepared by Hand Layup Method," American Journal of Bioscience and Bioengineering, vol. 5, no. 1, 2017, doi: 10.11648/j.bio.20170501.12.
D. K. Rajak, D. D. Pagar, P. L. Menezes, and E. Linul, "Fiber-reinforced polymer composites: Manufacturing, properties, and applications," Polymers, vol. 11, no. 10, p. 1667, 2019.
K. Balasubramanian, M. T. Sultan, and N. Rajeswari, "Manufacturing techniques of composites for aerospace applications," in Sustainable composites for aerospace applications: Elsevier, 2018, pp. 55-67.
G. S. C. Assunção, J. A. Velasques, A. Zakrzevski, and I. d. Costa, "Mechanical properties of glass-fiber reinforced polyester composites manufactured by two different spray-up techniques," Matéria (Rio de Janeiro), vol. 29, no. 3, 2024, doi: 10.1590/1517-7076-rmat-2024-0450.
B. Xiao, Y. Yang, X. Wu, M. Liao, R. Nishida, and H. Hamada, "Hybrid laminated composites molded by spray lay-up process," Fibers and polymers, vol. 16, pp. 1759-1765, 2015.
P. W. Beaumont and C. H. Zweben, "Comprehensive composite materials," Elsevier, 2018.
G. D. Shrigandhi and B. S. Kothavale, "Biodegradable composites for filament winding process," Materials Today: Proceedings, vol. 42, pp. 2762-2768, 2021.
Y. Leong, S. Thitithanasarn, K. Yamada, and H. Hamada, "Compression and injection molding techniques for natural fiber composites," in Natural Fibre Composites: Elsevier, 2014, pp. 216-232.
H. Fu, "Overview of injection molding technology for processing polymers and their composites," ES Materials & Manufacturing, vol. 8, no. 20, pp. 3-23, 2020.
P. A. Arrabiyeh, D. May, M. Eckrich, and A. M. Dlugaj, "An overview on current manufacturing technologies: Processing continuous rovings impregnated with thermoset resin," Polymer Composites, vol. 42, no. 11, pp. 5630-5655, 2021.
G. L. Goh, N. Saengchairat, S. Agarwala, W. Y. Yeong, and T. Tran, "Sessile droplets containing carbon nanotubes: A study of evaporation dynamics and CNT alignment for printed electronics," Nanoscale, vol. 11, no. 22, pp. 10603-10614, 2019.
J. S. Jayan, S. Appukuttan, R. Wilson, K. Joseph, G. George, and K. Oksman, "An introduction to fiber reinforced composite materials," in Fiber reinforced composites: Elsevier, 2021, pp. 1-24.
M. O. Seydibeyoglu, A. K. Mohanty, and M. Misra, Fiber technology for fiber-reinforced composites. Woodhead Publishing, 2017.
P. Yaashikaa, P. S. Kumar, S. Varjani, and A. Saravanan, "A critical review on the biochar production techniques, characterization, stability and applications for circular bioeconomy," Biotechnology reports, vol. 28, p. e00570, 2020.
M. Akif Yalcinkaya, G. E. Guloglu, M. Pishvar, M. Amirkhosravi, E. Murat Sozer, and M. Cengiz Altan, "Pressurized infusion: A new and improved liquid composite molding process," Journal of Manufacturing Science and Engineering, vol. 141, no. 1, p. 011007, 2019.
S. Maiti, M. R. Islam, M. A. Uddin, S. Afroj, S. J. Eichhorn, and N. Karim, "Sustainable Fiber‐Reinforced Composites: A Review," Advanced Sustainable Systems, vol. 6, no. 11, 2022, doi: 10.1002/adsu.202200258.
H. J. Kim and J. H. Song, "Improvement in the mechanical properties of carbon and aramid composites by fiber surface modification using polydopamine," Composites Part B: Engineering, vol. 160, pp. 31-36, 2019, doi: 10.1016/j.compositesb.2018.10.027.
R. Tokonami, K. Aoki, T. Goto, and T. Takahashi, "Surface Modification of Carbon Fiber for Enhancing the Mechanical Strength of Composites," Polymers (Basel), vol. 14, no. 19, Sep 24 2022, doi: 10.3390/polym14193999.
J. Li, "Synergetic surface modification of 3D braided carbon fiber-reinforced composites for enhancing mechanical strength," Applied Surface Science, vol. 639, p. 158189, 2023.
M. Megahed, A. A. Megahed, and M. A. Agwa, "The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy," Journal of Industrial Textiles, vol. 49, no. 2, pp. 181-199, 2018, doi: 10.1177/1528083718775978.
S. Li, "Epoxy-functionalized polysiloxane/Nano-SiO2 synergistic reinforcement in cryogenic mechanical properties of epoxy and carbon fiber reinforced epoxy laminate," Composites Science and Technology, vol. 198, p. 108292, 2020.
Q. Hu, H. Memon, Y. Qiu, W. Liu, and Y. Wei, "A Comprehensive Study on the Mechanical Properties of Different 3D Woven Carbon Fiber-Epoxy Composites," Materials (Basel), vol. 13, no. 12, Jun 18 2020, doi: 10.3390/ma13122765.
Y. K. Kirmasha, M. J. Sharba, Z. Leman, and M. T. H. Sultan, "Mechanical Performance of Unstitched and Silk Fiber-Stitched Woven Kenaf Fiber-Reinforced Epoxy Composites," Materials (Basel), vol. 13, no. 21, Oct 28 2020, doi: 10.3390/ma13214801.
S. Dinesh, T. Rajasekaran, M. Dhanasekaran, and K. Vigneshwaran, "Experimental testing on mechanical properties of sandwich structured carbon fibers reinforced composites," in IOP Conference Series: Materials Science and Engineering, 2018, vol. 402, no. 1: IOP Publishing, p. 012180.
L. Wang, X. Liu, S. Saleemi, Y. Zhang, Y. Qiu, and F. Xu, "Bending properties and failure mechanisms of three-dimensional hybrid woven spacer composites with glass and carbon fibers," Textile research journal, vol. 89, no. 21-22, pp. 4502-4511, 2019.
H. Junaedi, T. Khan, and T. A. Sebaey, "Characteristics of Carbon-Fiber-Reinforced Polymer Face Sheet and Glass-Fiber-Reinforced Rigid Polyurethane Foam Sandwich Structures under Flexural and Compression Tests," Materials, vol. 16, no. 14, p. 5101, 2023.
M. Ponnusamy, L. Natrayan, S. Kaliappan, G. Velmurugan, and S. Thanappan, "Effectiveness of nanosilica on enhancing the mechanical and microstructure properties of kenaf/carbon fiber-reinforced epoxy-based nanocomposites," Adsorption Science & Technology, vol. 2022, 2022.
M. Hossain, "Enhanced mechanical properties of carbon fiber/epoxy composites by incorporating XD-grade carbon nanotube," Journal of Composite Materials, vol. 49, no. 18, pp. 2251-2263, 2015.
D. C. Davis, J. W. Wilkerson, J. Zhu, and D. O. Ayewah, "Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology," Composite Structures, vol. 92, no. 11, pp. 2653-2662, 2010.
S. Ekşi and K. Genel, "Comparison of mechanical properties of unidirectional and woven carbon, glass and aramid fiber reinforced epoxy composites," Acta Physica Polonica A, vol. 132, no. 3, pp. 879-882, 2017.
F. Xu, D.-d. Huang, and X. Du, "Improving the delamination resistance of carbon fiber/epoxy composites by brushing and abrading of the woven fabrics," Construction and Building Materials, vol. 158, pp. 257-263, 2018.
M. Y. Abdellah, M. K. Hassan, A. F. Mohamed, and A. H. Backar, "Cyclic relaxation, impact properties and fracture toughness of carbon and glass fiber reinforced composite laminates," Materials, vol. 14, no. 23, p. 7412, 2021.
H. F. AL-Qrimli, F. A. Mahdi, and F. B. Ismail, "Carbon/epoxy woven composite experimental and numerical simulation to predict tensile performance," Advances in Materials Science, vol. 4, no. 2, pp. 33-41, 2015.
A. K. Srivastava, V. Gupta, C. S. Yerramalli, and A. Singh, "Flexural strength enhancement in carbon-fiber epoxy composites through graphene nano-platelets coating on fibers," Composites Part B: Engineering, vol. 179, p. 107539, 2019.
A. I. Kaya, M. Kisa, and M. Ozen, "Influence of natural weathering conditions on the natural frequency change of woven carbonfibre reinforced composites," Advanced Composites Letters, vol. 27, no. 2, p. 096369351802700201, 2018.
F. Wang and X. Cai, "Improvement of mechanical properties and thermal conductivity of carbon fiber laminated composites through depositing graphene nanoplatelets on fibers," Journal of materials science, vol. 54, no. 5, pp. 3847-3862, 2019.
M. S. Tareq, S. Zainuddin, E. Woodside, and F. Syed, "Investigation of the flexural and thermomechanical properties of nanoclay/graphene reinforced carbon fiber epoxy composites," Journal of Materials Research, vol. 34, no. 21, pp. 3678-3687, 2019.
I. Ary Subagia and Y. Kim, "A study on flexural properties of carbon-basalt/epoxy hybrid composites," Journal of Mechanical Science and Technology, vol. 27, pp. 987-992, 2013.
Q. Hu, H. Memon, Y. Qiu, W. Liu, and Y. Wei, "A comprehensive study on the mechanical properties of different 3D woven carbon fiber-epoxy composites," Materials, vol. 13, no. 12, p. 2765, 2020.
V. Phunpeng, K. Saensuriwong, T. Kerdphol, and P. Uangpairoj, "The flexural strength prediction of carbon fiber/epoxy composite using artificial neural network approach," Materials, vol. 16, no. 15, p. 5301, 2023.
R. Tokonami, K. Aoki, T. Goto, and T. Takahashi, "Surface modification of carbon fiber for enhancing the mechanical strength of composites," Polymers, vol. 14, no. 19, p. 3999, 2022.
Z. Yao, "Interfacial improvement of carbon fiber/epoxy composites using one-step method for grafting carbon nanotubes on the fibers at ultra-low temperatures," Carbon, vol. 164, pp. 133-142, 2020.
S. De, A. O. Fulmali, K. C. Nuli, R. K. Prusty, B. G. Prusty, and B. C. Ray, "Improving delamination resistance of carbon fiber reinforced polymeric composite by interface engineering using carbonaceous nanofillers through electrophoretic deposition: An assessment at different in‐service temperatures," Journal of Applied Polymer Science, vol. 138, no. 15, p. 50208, 2021.
C. Chen, P. Wang, and X. Legrand, "Effect of core architecture on charpy impact and compression properties of tufted sandwich structural composites," Polymers, vol. 13, no. 10, p. 1665, 2021.
V. Balakumaran, R. Alagirusamy, and D. Kalyanasundaram, "Epoxy based sandwich composite using three-dimensional integrally woven fabric as core strengthened with additional carbon face-sheets," J Mech Behav Biomed Mater, vol. 116, p. 104317, Apr 2021, doi: 10.1016/j.jmbbm.2021.104317.
F. Liu, S. Deng, and J. Zhang, "Mechanical properties of epoxy and its carbon fiber composites modified by nanoparticles," Journal of Nanomaterials, vol. 2017, 2017.
T. S. Dawood, B. M. Fadhil, and D. O. Ramadan, "Effects of silica nanoparticles on glass and carbon fiber epoxy composites," Nexo Revista Científica, vol. 35, no. 05, pp. 75-86, 2023.
M. Alsaadi, M. Bulut, A. Erkliğ, and A. Jabbar, "Nano-silica inclusion effects on mechanical and dynamic behavior of fiber reinforced carbon/Kevlar with epoxy resin hybrid composites," Composites Part B: Engineering, vol. 152, pp. 169-179, 2018.
A. Erklig, A. Jabbar, and M. Alsaadi, "Tensile and flexural behavior of nano-silica modified carbon/Kevlar hybrid composites," in International Conference on Advanced Technology & Sciences, September, 2016, pp. 01-03.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Riad Harwill Abdul Abas, Adil Elrayah, Rui Guo, Azher S Barrak, Salman Aatif
This work is licensed under a Creative Commons Attribution 4.0 International License.
