Vol. 6 No. 1 (2024): March - 2024

View Vol. 6 No. 1 (2024): March - 2024

This issue consists of 10 articles from 38 authors affiliated with 11 institutions from 7 countries including:

Iraq (Middle Technical University, University of Baghdad, Mustansiriyah University)
Brazil (Universidade Federal de Lavras)
Islamic Republic of Iran (Islamic Azad University)
Malaysia (Universiti Teknologi Malaysia, Universiti Utara Malaysia)
Tunisia (University of Monastir)
China (Southwest Jiaotong University, School of Geodesy and Geomatics)
Sultanate of Oman (Sohar University)

DOI: https://doi.org/10.51173/jt.v6i1
Published: 2024-03-31

Engineering

  • IEEE 69-bus RDS after optimization process

    Power Loss Reduction and Reliability Improvement of Radial Distribution Systems Using Optimal Capacitor Placement Technique

    Mohanad Muneer Yaqoob, Ali Nasser Hussain, Wathiq Rafa Abed, Daniel Augusto Pereira
    1-9
    DOI: https://doi.org/10.51173/jt.v6i1.1215
  • Peaks of PPG signals

    Smart Patch for Non-Invasive Blood Pressure Monitoring in Epileptic Seizure Patients via the Sole

    Murtadha Mohammed Mahdi, Sadik Kamel Gharghan, Saleem Lateef Mohammed, Ibrahim Amer Ibrahim
    10-20
    DOI: https://doi.org/10.51173/jt.v6i1.1624
  • Soil meshing model

    Study of the Impact Irregular Concrete Facilities with the Shear Walls Based: The Effect of Soil-Structure Interaction with ABAQUS Software

    Wisam Fawzi Aljuhaishi, Javad Esfandiari
    21-32
    DOI: https://doi.org/10.51173/jt.v6i1.1654
  • Illustrates some kinds of face disease

    Image-Based Face Recognition Techniques Used in Disease Detection Approaches: A Survey

    Ghalib Ahmed Salman, Inas Jawad Kadhim, Ahmed Husham Al-Badri
    33-44
    DOI: https://doi.org/10.51173/jt.v6i1.1966
  • SEM of resistance spot welded AISI 1005

    Influence of Welding Parameters on Mechanical Properties and Microstructure of Similar Low-Carbon Steel AISI 1005 Welding by Resistance Spot Welding

    Osamah Sabah Barrak, Sami Chatti, Slim Ben-Elechi
    45-51
    DOI: https://doi.org/10.51173/jt.v6i1.2114
  • Schematic drawing for the flat plate collector [13]; 1) Aluminium frame, 2) Silicone seal, 3) Side wall thermal insulation, 4) Back wall thermal insulation, 5) Absorber plate, 6) Copper tubes, 7) Glass cover, 8) Aluminum back

    Performance Improving for the Flat Plate Solar Collectors by Using Nanofluids: Review Study

    Mohammed A. Abduljleel, Nabil J. Yasin, Safaa A. Ghadhban, Sumair Ahmed Soomro
    52-68
    DOI: https://doi.org/10.51173/jt.v6i1.1891
  • Tested PV module and solar survey meter (SS200R)

    Optimization of Neurons Number in Artificial Neural Network Model for Predicting the Power Production of PV Module

    Hussain Hamdi Khalaf, Ali Nasser Hussain, Zuhair S. Al-Sagar, Abdulrahman Th. Mohammad, Hilal A. Fadhil
    69-77
    DOI: https://doi.org/10.51173/jt.v6i1.895
  • Factors affecting sanitation services

    A Review of Sustaining Sanitation Services Approach

    Muntaha Saad, Mufid al-hadithi, Thaer Jasim, Aymen Yousif, Mohamed Freeshah
    78-84
    DOI: https://doi.org/10.51173/jt.v6i1.919
  • Show the conversion of the audio signal into a spectrogram

    Classification of Dyslexia Among School Students Using Deep Learning

    Alia Hussein, Ahmed Talib Abdulameer, Ali Abdulkarim, Husniza Husni, Dalia Al-Ubaidi
    85-92
    DOI: https://doi.org/10.51173/jt.v6i1.1893
  • AFM image of Au nanofilm layer deposited at 10-second sputtering time

    Optical Observations of Sputtered Au-nanostructures and Characterizations

    Sabah Jameel Mezher, Mohammed O. Dawood, Bahjat B. Kadhim
    93-102
    DOI: https://doi.org/10.51173/jt.v6i1.1418