Nanocomposites for Prosthetic Dental Technology: A Systemic Review

Authors

  • Wafaa Atallah College of Health & Medical Technology - Baghdad, Middle Technical University, Baghdad, Iraq
  • Nihad AlFuraiji College of Health & Medical Technology - Baghdad, Middle Technical University, Baghdad, Iraq
  • Oday H Hussein University of Sheffield, Sheffield S1 3JD,UK

DOI:

https://doi.org/10.51173/jt.v5i1.1178

Keywords:

Nanocomposites, Prosthetic Restorations, Nanoparticles, Nanodentistry, Biomaterials Implants

Abstract

In order to obtain the desired outcomes, nanotechnology employs approaches to control shape, size, and texture of elements in the necessary nano scale. It was previously used primarily in the areas of substance chemical productions and physics; however this has changed through the advancement of new technologies. Over time, biological scientists became aware of its numerous benefits and investigated them in their respective fields.

To assess current knowledge about nanocomposites and their applications in prosthetic dental technology.

On this topic, an electronic systematic review was conducted in various databases (Google Scholar research, Science Direct reports, PubMed studies, and Web of Science data), as well as a hand search of the scientific literature. From 2014 to 2022, published work was collected, analysed, and relevant articles were chosen for inclusion in this review. Nanocomposites and their applications in prosthetic dental technology have been reported in several studies. More than 36 papers were chosen for this review based on their applicability.

The findings suggest that current knowledge was adequate to recommend nanocomposites and their applications in prosthetic dental technology for routine laboratory use, with improvements in each of the current nano materials and procedures for prosthetic dental technology.

Because of their physical and chemical properties, polymer nanocomposites were suitable for prosthetic restorations; however, careful processing methods, nano materials, laboratory skill, and a strict protocol for prosthetic restoration are required to improve the mechanical and physical properties.

Downloads

Download data is not yet available.

Author Biographies

Nihad AlFuraiji, College of Health & Medical Technology - Baghdad, Middle Technical University, Baghdad, Iraq

Prosthodontic Dental Techniques Department

Oday H Hussein, University of Sheffield, Sheffield S1 3JD,UK

Department of Materials Science and Engineering, Sir Robert Hadfield Building

References

D. Sendil Kumar, "Study On Influence Of Nanoadditives In Vapour Compression Refrigeration System," 2014.

W. Khan, N. Hamadneh, and W. Khan, "Science and applications of tailored nanostructures," ed: One Central Press (OCP), 2016.

S. Bej, T. Saastamoinen, Y. P. Svirko, and J. Turunen, "Grating theory approach to optics of nanocomposites," Materials, vol. 14, no. 21, p. 6359, 2021.

A. Bhat et al., "Review on nanocomposites based on aerospace applications," Nanotechnology Reviews, vol. 10, no. 1, pp. 237-253, 2021.

A. Alhareb, H. Akil, and Z. Ahmad, "Mechanical properties of PMMA denture base reinforced by nitrile rubber particles with Al2O3/YSZ fillers," Procedia Manufacturing, vol. 2, pp. 301-306, 2015.

B. Ali Sabri, M. Satgunam, N. Abreeza, and A. N. Abed, "A review on enhancements of PMMA denture base material with different nano-fillers," Cogent Engineering, vol. 8, no. 1, p. 1875968, 2021.

S. Manjunatha, D. Biradar, and Y. R. Aladakatti, "Nanotechnology and its applications in agriculture: A review," J farm Sci, vol. 29, no. 1, pp. 1-13, 2016.

I. Sanzari, A. Leone, and A. Ambrosone, "Nanotechnology in plant science: to make a long story short," Frontiers in Bioengineering and Biotechnology, vol. 7, p. 120, 2019.

W. F. Abobatta, "Nanotechnology application in agriculture," Acta Scientific Agriculture, vol. 2, no. 6, 2018.

M. Taran, M. Safaei, N. Karimi, and A. Almasi, "Benefits and application of nanotechnology in environmental science: an overview," Biointerface Research in Applied Chemistry, vol. 11, no. 1, pp. 7860-7870, 2021.

J. Huang, J. Zhou, and M. Liu, "Interphase in polymer nanocomposites," JACS Au, vol. 2, no. 2, pp. 280-291, 2022.

R. A. Bapat et al., "Review on synthesis, properties and multifarious therapeutic applications of nanostructured zirconia in dentistry," RSC advances, vol. 12, no. 20, pp. 12773-12793, 2022.

R. Manjunatha, K. Usharani, and D. Naik, "Synthesis and characterization of ZnO nanoparticles: A review," Journal of Pharmacognosy and Phytochemistry, vol. 8, no. 3, pp. 1095-1101, 2019

J. Hornak, "Synthesis, properties, and selected technical applications of magnesium oxide nanoparticles: a review," International Journal of Molecular Sciences, vol. 22, no. 23, p. 12752, 2021.

Chen, L., Rende, D., Schadler, L. S., & Ozisik, R. Polymer nanocomposite foams. Journal of Materials Chemistry A, 1(12), 3837-3850.‏), 2013.

A.J. Ruys, Alumina Ceramics: Biomedical and Clinical Applications, UK: Woodhead Publishing, 2018.

CeramTec, The Most Well-known Oxide Ceramic Material, CeramTec, Germany, n.d., Accessed on: Oct. 28, 2019. [Online] Available: https://www.ceramtec.com/ceramic-materials/aluminum-oxide/#

American Elements, Aluminum Oxide, American Elements, USA, n.d., Accessed on: Oct. 28, 2019. [Online] Available: https://www.americanelements.com/aluminum-oxide-1344-28-1

R. Narain, Polymer science and nanotechnology: fundamentals and applications. Elsevier, 2020.

S. Shirkavand and E. Moslehifard, "Effect of TiO2 nanoparticles on tensile strength of dental acrylic resins," Journal of dental research, dental clinics, dental prospects, vol. 8, no. 4, p. 197, 2014.

P. Cevik and A. Z. Yildirim‐Bicer, "The effect of silica and prepolymer nanoparticles on the mechanical properties of denture base acrylic resin," Journal of prosthodontics, vol. 27, no. 8, pp. 763-770, 2018.

G. Ergun, Z. Sahin, and A. S. Ataol, "The effects of adding various ratios of zirconium oxide nanoparticles to poly (methyl methacrylate) on physical and mechanical properties," Journal of oral science, vol. 60, no. 2, pp. 304-315, 2018.

S. A. Al-Hiloh and I. J. Ismail, "A study the effect of addition of silanized zirconium oxide nanoparticles on some properties of high-impact heat-cured acrylic resin," Journal of baghdad college of dentistry, vol. 325, no. 3500, pp. 1-7, 2016.

M. Basima and A. Aljafery, "Effect of addition ZrO2-Al2O3 nanoparticles mixture on some properties and denture base adaptation of heat cured acrylic resin denture base material," Journal of Baghdad College of Dentistry, vol. 27, no. 3, pp. 15-21, 2015.

I. N. Safi, "Evaluation the effect of nano-fillers (TiO2, AL2O3, SiO2) addition on glass transition temperature, E-Moudulus and coefficient of thermal expansion of acrylic denture base material," Journal of Baghdad College of Dentistry, vol. 325, no. 2212, pp. 1-10, 2014.

T. H. Abushowmi et al., "Comparative effect of glass fiber and nano‐filler addition on denture repair strength," Journal of Prosthodontics, vol. 29, no. 3, pp. 261-268, 2020.

A. Nabhan, M. Taha, and N. M. Ghazaly, "Filler loading effect of Al2O3/TiO2 nanoparticles on physical and mechanical characteristics of dental base composite (PMMA)," Polymer Testing, p. 107848, 2022.

R. H. Karadi and B. M. Hussein, "Effect of modified nanohydroxyapatite fillers addition on some properties of heat cured acrylic denture base materials," Journal of Baghdad College of Dentistry, vol. 29, no. 2, pp. 49-54, 2017.

K. Chęcińska, M. Chęciński, M. Sikora, Z. Nowak, S. Karwan, and D. Chlubek, "The Effect of Zirconium Dioxide (ZrO2) Nanoparticles Addition on the Mechanical Parameters of Polymethyl Methacrylate (PMMA): A Systematic Review and Meta-Analysis of Experimental Studies," Polymers, vol. 14, no. 5, p. 1047, 2022.

N. Elshereksi, A. Muchtar, and C. Azhari, "Effects of nanobarium titanate on physical and mechanical properties of poly (methyl methacrylate) denture base nanocomposites," Polymers and Polymer Composites, vol. 29, no. 5, pp. 484-496, 2021.

A. M. A. Aljafery, "Flexural Resistance and Impact Resistance of High-Impact Acrylic Resin with Addition of TiO2-Al2O3 Nanoparticles," Nano Biomed. Eng, vol. 10, no. 1, pp. 40-45, 2018.

J. Mikael, S. Al-Samaraie, and F. Ikram, "Evaluation of Some Properties of Acrylic Resin Denture Base Reinforced with Calcium Carbonate Nano-Particles," Erbil Dental Journal (EDJ), vol. 1, no. 1, pp. 41-47, 2018.

I. J. Ismail and O. Muklif, "Studying the effect of addition a composite of silanized Nano-Al2O3 and plasma treated polypropylene fibers on some physical and mechanical properties of heat cured PMMA denture base material," Journal of Baghdad College of Dentistry, vol. 27, no. 3, pp. 22-7, 2015.

M. A. Helal et al., "Effect of SiO2 and Al2O3 nanoparticles on wear resistance of PMMA acrylic denture teeth," Brazilian Dental Science, vol. 23, no. 3, pp. 12 p-12 p, 2020.

S. Mutiara et al., "The Effect of Titanium Oxide (Tio2) Nanoparticles Addition on Polymethyl Methacrylate Denture Base Impact Strength, Tensile Strength, and Hardness," Journal of International Dental and Medical Research, vol. 14, no. 4, pp. 1442-1446, 2021.

J. Sun et al., "A review on additive manufacturing of ceramic matrix composites," Journal of Materials Science & Technology, 2022.

M. M. Shameem, S. Sasikanth, R. Annamalai, and R. G. Raman, "A brief review on polymer nanocomposites and its applications," Materials Today: Proceedings, vol. 45, pp. 2536-2539, 2021

Schematic representation of zero-dimensional (OD), one dimensional (1D), two dimensional (2D), and three dimensional (3D) nanomaterial and density of electron states of a semiconductor by varying dimension

Downloads

Published

2023-04-03

How to Cite

Atallah, W., Nihad AlFuraiji, & Oday H Hussein. (2023). Nanocomposites for Prosthetic Dental Technology: A Systemic Review. Journal of Techniques, 5(1), 129–136. https://doi.org/10.51173/jt.v5i1.1178

Issue

Section

Medical techniques

Similar Articles

<< < 1 2 

You may also start an advanced similarity search for this article.