The Effectiveness of the Green Design and Manufacturing Decision in Achieving the Outstanding Performance of the Industrial Companies: An Analytical Study in Al-Zawraa General Company

Authors

  • Ikhlas Satar Oglah Institute of Technology / Baghdad, Middle Technical University, Baghdad, Iraq

DOI:

https://doi.org/10.51173/jt.v5i2.1232

Keywords:

Product Design, Green Manufacturing, Outstanding Performance, Environmentally Friendly Designs, Green Technology

Abstract

The objective of this research is to analyze the impact of product design decisions and green manufacturing on Al-Zawraa General Company's competitive advantage in Iraq. Data was collected through a questionnaire that measured key variables، such as product design، green manufacturing، and outstanding performance. Each major variable was further evaluated through three sub-dimensions. Out of the 75 employees invited to participate، 60 staff responded to the questionnaire. Quantitative and qualitative methods، such as arithmetic means، standard deviations، and confirmatory factor analysis، were employed to examine the effect of the key variables in implementing the green manufacturing system in the company.  The study's findings suggest that the company's management should reconsider its approach to green technology by implementing modern automation methods that utilize environmentally friendly energy sources. This change would not only help to reduce industrial pollution rates and benefit the environment but also enhance the company's appeal to consumers and ensure its longevity and competitiveness in the local and global industrial markets. Furthermore، the study revealed a strong correlation between the key variables and the successful adoption of the green manufacturing system.

Downloads

Download data is not yet available.

Author Biography

Ikhlas Satar Oglah, Institute of Technology / Baghdad, Middle Technical University, Baghdad, Iraq

      

References

Akla، Ikhlas Star،(2022)، “Product design decision and its impact on customer delight: an exploratory study in the General Company for the manufacture of vegetable oils”، Journal of Administration and Economics / Al-Mustansiriya University Issue 132، March 2022، p. (56-74).

Rhima، Mustafa Hatwan&Ahmed، Mohammed Abd،(2020)، “Test the Moderating and Mediating role of organizational culture in the relationship between servant leadership and employees performance (an analytical research of the views of a sample of employees in Al Zawraa general company” Journal of Techniques، ISSN: 2708-8383، Vol. 2، No. 4، December 31، 2020، Pages 16-32.

Kadhum، Amer Abdul Latif&Hasan، Bilal Ahmed،(2022)،” Applying WCM Safety Pillar to Achieve the Social Sustainability: A Case Study of the State Company for Hydraulic Industries”، Journal of Techniques، ISSN: 2708-8383، Vol. 4، No. 4، December 31، 2022، Pages 237-245.

Jayan Reem Abdulkareem،(2018)،"The impact of core capabilities on product design decision (An exploratory study in an industrial organization) message I submitted To the Council of Administrative Technical College/ Baghdad It is part of the requirements for obtaining a technical master's degree in Operations Management Technologies".

Ahmed، Zervan Bashar & Colley، Mehvan Sharif، (2021)، “Dimensions of Strategic Quality Management and Its Role in Achieving Green Manufacturing Requirements”، Journal of Human Sciences of the University of Zakho، Vol. 9، No. 2، p. 327–351، June.-2021.

Magbas، Haider Abdel-Mohsen & Al-Bayati، Muhammad Thaer Ali، “The Impact of Talent Management Strategies in Achieving Outstanding Performance / An Exploratory Study in the Presidency of Al-Mustansiriya University.”

Stevenson،William J.،(2015): "Operations Management"،12 thEd.، McGraw-Hill، U.S.A. Verma، H. V. (2003). ―Customer Outrage and Delight‖. Journal of Service Research، 3 (August)، 119-133.

Khalil، Alia Muhammad، (2016): "The Impact of Technical Creativity in Product Design"، an exploratory study of the opinions of a sample of workers in the General Company for Leather Industries، Baghdad Factory، Journal of the University College of Economic Sciences، College of Administration and Economics، University of Baghdad، Issue: 48، p.: 418.

Heizer،J.، Render،B.&Munson،C.،(2017): "O P E R At I O N S Management"، Sustainability And Supply Chain Management،12thed.،، U.S.A.

Shafer Scott M.،&Meredith،Jack R.،(1998): " Management"، Aprocess Approacb With Spreadsbeets،3 rd Ed.، New York،U.S.A.

Russell،Roberta S.،Taylor،III Bernard W.،(2011):" Operations Management"، Creating Value Along the Supply Chain،7 thEd.، Courier /Kendallville، U.S.A.

Mirza، Sama Saher Antoun، (2007): “The effect of using DFSS technology in product design”، an exploratory study of the opinions of a sample of managers of the fan factory in the General Company for Electrical Industries، a master’s thesis in process techniques، Technical Administrative College / Technical Education Authority.

Al-Khatib، Samir Kamel، (2008)، “Total Quality Management and ISO Contemporary Introduction”، first edition، Library of Egypt and Dar Al-Murtaza، Baghdad، Iraq.

Monika، susterova، jaak lavin، & jueri، riives.،(2012)،" risk management in product development process"، proceedings international daaam symposium، v. 23، no:1 Pp،:225-228.

Mohsen، Abdul Karim، and Al-Najjar، Sabah Majeed، (2012): “Management of Production and Operations،” Fourth Edition، Al-Zakira for Publishing and Distribution، Baghdad، Iraq.

Talapatra، Subrata، Shakil، Md.، Mondal، Pritom Kumar، Islam، Md. Saiful.،(2014):" Implementation of Product Design Tools for the Development of an Automated Vegetable Chopper"، Department of Industrial Engineering & Management (IEM)، Khulna University of Engineering & Technology (KUET)،Technology and Investment،V.5،P. 1-7.

Deif، Ahmed.،(2011)،"System Model of Green manufacturing" Advance in Production Engineering & Management Journal، PP.27-36.

Yas، Wisam Abas&Hassan، Shifa Balasim،(2022)،” The Effect of Strategic Flexibility on the Organization Performance، the Mediating Role of the Supply Chain Agility”، Journal of Techniques، ISSN: 2708-8383، Vol. 4، No. 4، December 31، 2022، Pages 180-190.

Tan، B. C.، & Yeap، P. F. (2012)،" What drives green restaurant patronage intention"?، International Journal of Business and Management،Vol. 7، No(2)،pp 215-223.

Eibel، D.، & Joanneum، F. H. (2014)،" Green Manufacturing An essential success factor in a globalized world"، Austrian Marshall Plan Foundation، FH JOANNEUM University of Applied Sciences Styria-Austria.

Mittal، V. K. (2017)،" Perspectives on Green Manufacturing". In Advanced Manufacturing Technologies، Springer، Cham.

Choudhary، N.، Islam، S. U.، Philip، P. J.، & Kumar، R. (2016)،" The Role of Green Manufacturing in Development of Ecologically Conscious Consumer Behavior (ECCB) towards Green Products"، Indian Journal of Science and Technology،Vol. 9،No(25)،pp. 1-6.

Musa، Kasra Antar Abdullah، Jamil، Shaima Muhammad Naguib، The Impact of Green Product Orientations on the Economic Environment in Light of Globalization in Selected Developing Countries (for the period 995-2010)، Tikrit Journal of Administrative Economic Sciences، College of Administration and Economics، University of Tikrit، Volume (08)، Issue (25).

Onder، Metin، (2014)، Maintenance As A Contributor In Green Production Systems Interviews with Volvo، Scania، and Dynamate، Msc thesis، School of Innovation، Design and Engineering، Malardalen University، Sweden.

Al-Rubaie، Louay Radhi Khalifa، (2017)، Evaluating the reality of the requirements of the green manufacturing system، a case study in the Diyala General Company for Electrical Industries، Master Thesis.

Al-Sabbagh، Azzam Abdel-Wahhab Abdel-Karim، (2018)، “The importance of green manufacturing and its impact on the transition to a green supply chain in the General Company for Batteries Industry،” Baghdad University College of Economic Sciences Journal، Issue (55)، pp. (69-100).

Liang، Shaoqiang،(2019)،" Development and Application of Green Manufacturing” Wuhan University of Science and Technology، IOP Conf. Series: Materials Science and Engineering.

Zhang، Min،(2014)،" Using Six Sigma to Achieve Sustainable Manufacturing- A Case Study in Aviation Company"، Msc thesis of Applied Science Quality Systems Engineering، Concordia University، Montreal، Quebec، Canada.

Younis، Hassan، (2016)، ‘The impact of the dimensions of green supply chain management practices on corporate performance” "This thesis is submitted in partial fulfilment of the requirements for the Degree of Doctorate of Business Administration، University of Wollongong in Dubai.

Bergmiller ،Gary ،(2006) ،Lean Manufacturers Transcendence to Green Manufacturing: Correlating the Diffusion of Lean and Green Manufacturing Systems، phd of Philosophy Industrial and Management Systems Engineering، College of Engineering، University of South Florida.

Al-Nama، Adel، Zakir 2007، The impact of the strategic information system on the requirements of green manufacturing، a study of selected organizations in Mosul، an unpublished doctoral thesis، University of Mosul.

Al-Taweel، Akram Ahmed، (2019)، green procurement strategies and their impact onGreen manufacturing requirements - a study in the National Furniture Industry Company Al-Manzi - Mosul، Tanmiat Al-Rafidain Journal، University of Mosul، Volume (38)، Issue.

Huiyu، Chen &Wei، Wang.،(2010)،"Green supply Chain Management For a Chinese Auto Manufacturer"، Master's Thesis in Industrial Engineering and Management، University of Gavle، Sweden.

Wisner، Joel D& Tan، Keah Choon& Leong، G. Keong.،(2012)، "Principles of Supply Chain Management A Balanced Approch"، 3th edition، Cengage Learning، South-Western، U.S.A.

Zhang، Zhihong& Xi Tian.،(2008)،" Necessarity of Practicing Green Manufacturing in Iron Industry from the Point of Social Responsibility"، International Journal of Business and Management، Vol. 3، No. 12 PP:142- 145.

Ljubojevic، C.، Ljubojevic، G.، & Maksimovic، N. (2012)،Social Responsibility and Competitive Advantage of the Companies in Serbia. Paper presented at the MIC 2012: Managing Transformation with Creativity; Proceedings of the 13th International Conference، Budapest، 22–24 November 2012.

Jayal، A.D.& Badurdeen F. O.W&. Dillon Jr& Jawahir، I.S، (2010)، "Sustainable Manufacturing: Modeling and Optimization Challenges at the Product Process and System Levels"، CIRP Journal of Manufacturing Science and Technology.P.147.

Chakravarty، Amiya.،(2014)،" Supply Chain Transformation Evolving with Emerging Business Paradigms"، Springer-Verlag Berlin،Heidelberg، New York، U.S.A.

Aguinis. Herman، (2011)، "Performance Management"، Edinburgh Business School، Heriot-Watt University Edinburgh، EH14 4AS United Kingdom.

Daved، W. (2001). Strategic Management"Mc Graw-hill companies، Inc، New York، U.S.A.

Radhi،Jawad M.،Dekhil،Zena K.،(2016)، The Effect of Strategic Human Resources Management Roles on Excellent Performance :An Analytical Study of the Opinions of a Sample of the Top Leadersips in some of the Iraqi Universities،" Al-Qadisiyah Journal of Administrative Sciences"،Vol.(18)، No. (3).

Loch، Christoph H.،& Chick، Stephen E.(2008)،" Management Quality and Competitiveness" Springer-Verlag Berlin Heidelberg.

Al-Fayyad، Mahmoud Muhammad، and Qadada، Issa Youssef، (2010): “Management of Production and Operations”، Nazmi’s Entrance، first edition، Dar Safaa for Publishing and Distribution، Amman-Jordan.

Al-Fatlawi، Meethaf (2012) “The impact of the organization’s position on achieving outstanding performance through organizational integration،” a case study at the University of Karbala، a doctoral thesis submitted to the Council of the College of Administration and Economics at the University of Baghdad.

Ali، Ikhlas Satar Oglah & Ismeel، Aesar Hassan،(2021):” The reality of total quality management in educational institutions and its role in achieving excellence performance”، Journal of Economics and Administrative Sciences Vol.27 (NO. 126) 2021، pp. 389-409.

Kranakis. E. (2004)." Fixing the Blame: Organizational Culture and the Quebec Bridge Collapse".Journal of Technology and Culture، Vol. 45، No.3، pp. 487-518.

Evans، J. R. & Raturi، A. J. (2005). Principles Of Operations Management. Cengage learning.

Tsui. Anne S.، Wang.H.& Xin. Katherine R. (2006)." Organizational Culture in China: An Analysis of Culture Dimensions and Culture Types".Journal of Management and Organization Review.Vol.2. No.3. PP. 345–376.

Martin Jaeger& Desmond Adair& Sondus AlQudah،(2013)،" MBNQA criteria used in the GCC countries " Emerald Group Publishing Limited، The TQM Journal، Vol. 25 No. 2، pp. 110-123.

Robit، M. John، J. (2005). Human Resource Management.9th edition، Pearson Prentice Hall.

Nickels، C.، Mchugh، M. & Mchugh، M. (2002). Understanding Business. 6th ed.، Irwin، McGraw-Hill.

Faulkner، Jane B.(2002)،" Baldrige Educational Quality Criteria as Another Model for Accreditation in American Community Colleges"، PH.D. Dissertation of Education، Oregon State University.

El- Hariri، R. (2010). Developing Image Of Higher Education Performance. International Journal Of Education،Vol 5، No. 1.

Berry. B. (2004).". Organizational Culture: A Framework and Strategies for Facilitating Employee Whistleblowing". Journal of Employee Responsibilities and Rights Journal، Vol. 16، No. 1.PP 1.

Uma Sekaran and Roger Bougie “ Research Methods for Business A Skill-Building Approach” Seventh Edition Copyright © 2016 John Wiley & Sons Ltd.

Kenneth S. Bordens Bruce B. Abbott” Research Design And Methods: A Process Approach، Tenth Edition” Indiana University—Purdue University Fort Wayne، Tenth Edition،2017.

Joseph F. Hair Jr.، William C. Black، Barr Y J. Babin، Rolph E. Anderson” Multivariate Data Analysis” Eighth Edition© 2019، Cengage Learning Emea.

Julie Pallant " Survival Manual A Step by Step Guide to Data Analysis Using IBM spss" 7th Edition New York، NY 10017 " 2020.

Robert F. Devellis)Scale Development Theory And Applications( Applied Social Research Methods 26 Sage Publications، Inc،: 2016.

Soleman H. Abu-Bader(2021)" Using Statistical Methods in Social Science Research: With a Complete SPSS Guide"Oxford University Press.

Awang، Zainuddin "Translated by Dr. Ibrahim Mukhaimer (2019) "Modeling Structural Equations Using the Amos Program A Simplified Guide to Teaching the Amos Program".

الانموذج الكامل لمتغير التصنيع الاخضر بعد التعديل والحذف

Downloads

Published

2023-06-30

How to Cite

Oglah, I. S. (2023). The Effectiveness of the Green Design and Manufacturing Decision in Achieving the Outstanding Performance of the Industrial Companies: An Analytical Study in Al-Zawraa General Company. Journal of Techniques, 5(2), 251–264. https://doi.org/10.51173/jt.v5i2.1232

Issue

Section

Management

Similar Articles

<< < 10 11 12 13 14 15 16 17 18 19 > >> 

You may also start an advanced similarity search for this article.