The Effect of Electroplated Ni Nanocoating on Fatigue Life of 1020 AISI Low Carbon Steel

Israa Akram Hantoosh; Aliaksandr Skaskevich

doi:10.51173/jt.v5i3.1608

Authors

Israa Akram Hantoosh Yanka Kupala State University Of Grodno, Grodno, Belarus
Aliaksandr Skaskevich Yanka Kupala State University Of Grodno, Grodno, Belarus

DOI:

https://doi.org/10.51173/jt.v5i3.1608

Keywords:

Electroplating, Low Carbon Steel 1020 AISI, Fatigue Life, Fatigue Strain, Nano Coating

Abstract

Low carbon steel 1020 AISI has been selected in this study to show the influence of Ni Nano coating on fatigue life of this metal under fatigue loading at room temperature with a stress ratio R= -1. The prepared specimens are exposed to electroplated process using Nano nickel with 40 nm at diverse situations to improve the fatigue limit of metal. (SCHENCK PUNN) rotating bending fatigue test, hardness, tensile strength, microstructure, surface roughness and SEM, XRD diffraction tests have been completed for base metal and electroplating treated metal. The experimental results indicate that Ni nano coating by electroplating improve the fatigue life at due to steel substrates are typically polished mechanically and chemically before deposition to enhance the fatigue properties and nano nickel have fair distribution on steel surface.

Downloads

Download data is not yet available.

Author Biographies

Israa Akram Hantoosh, Yanka Kupala State University Of Grodno, Grodno, Belarus

Aliaksandr Skaskevich, Yanka Kupala State University Of Grodno, Grodno, Belarus

Materials Science and Resource-Saving Technologies

References

Jaromír Wasserbauer, Martin Buchtík , Jakub Tkacz , Stanislava Fintová, Jozef Minda and Leoš Doskocˇil, " Improvement of AZ91 Alloy Corrosion Properties by Duplex NI-P Coating Deposition", Materials journal 2020, 13, 1357; doi:10.3390/ma13061357 www.mdpi.com/journal/materials.

Layth Zbbal Abd UL Kareem, Ali Sadiq Alithari1 and Nabeel AL-Zurfi,"Influence of Adding Nano Coating Layers on the Hardness and Impact strength Properties for Low Carbon Steel 2020IOP Conf. Series: Materials Science and Engineering1094 (2021) 012137IOP Publishing doi:10.1088/1757-899X/1094/1/012137"

H. E. Cardenas, A. Shresth , " Characteristics of Electroplated Iron Applied to Low Carbon Steel" ,AIP Publishing. – 2018. – Vol. 2022, iss. Mode of access: https://aip.scitation.org/doi/10.1063/1.5060698. – Date of access: 23.11.2022.

Naseer Malik AbbasIn, Zahraa Thamer AbdulwahidIraq, Asmaa Ali Hussien, S.V. KonovalovSiberian, Hamid M. Mahan,"Formability, Mechanical and Chemical Properties Assessment for High Strength AA7075 Subjected to Annealing Heat Treatment, Journal of Techniques, ISSN: 2708-8383, Vol. 5, No. 1, 2023, Pages 16-21, https://doi.org/10.51173/jt.v5i1.1107.

Osamah Sabah Barrak, Osamah Fattah Taresh, Mahmood Mohammed Hamzah, and Rusul Ahmed Shakir, “An Investigation of Joining Polyamide (PA) to Stainless Steel AISI 316L by Hot Press Process”, JT, vol. 5, no. 1, pp. 114–121, Apr. 2023, https://doi.org/10.51173/jt.v5i1.1280.

Henry E. Cardenas and Aawaz Shrestha" Protective characteristics of electroplated iron applied to low carbon steel" AIP Conference Proceedings 2022, 020018 (2018); https://doi.org/10.1063/1.5060698.

J N Hasnidawani, H N Azlina, H Norita1 and N N Bonnia, "Hardness and adhesion performances of Nano coating on carbon steel" IOP Conf. Series: Materials Science and Engineering, 290 (2018) 012078.

Norhasnidawani Johari, Noor Azlina Hassan, Norita Hassan, and Mohd Hanafi "Ani Effect of Nanoparticles on Wettability of Nanocoating on Carbon Steel " International Journal of Engineering Materials and Manufacture (2016) 1(2) 71-74, https://doi.org/10.26776/ijemm.01.02.2016.05.

Meihua Liu, Dongai Wang, Huaiwen Wang, Yan Shi 1, Bing Liu, Feihui Li,Yunlan Gong and Wengang Zhang, " Study on Optimization Technology to StrengthenNi-Based Composite Coating ElectroplateContaining Nanodiamond" Materials, Journal 2019, 12, 1654; doi:10.3390/ma12101654 www.mdpi.com/journal/materials