Chemical Immersion Effects on Wear Property of Epoxy Reinforced Copper Powder Composites

Authors

  • Raghad Hamid Hilal Department of Applied Science, University of Technology, Baghdad, Iraq.

DOI:

https://doi.org/10.51173/jt.v4i1.444

Keywords:

Chemical Solution, Roughness, Hardness, Wear Rate, Epoxy

Abstract

In this research, the effect of chemical solutions: (sulfuric acid H2SO4, sodium hydroxide NaOH) at (5 M) and distilled water were studied on some mechanical properties. Especially the wear resistance by pin-on-disk and hardness properties for neat epoxy composite and (epoxy - copper powder) composite. That has been prepared by hand mixing (weight ratio = 20%). The samples were immersed in these chemical solutions for different periods (7, 14, and 30) days. Then the hardness by the Shore D method was measured before and after immersion of the samples in acidic, neutral, and alkali solutions.  Whereas the hardness was measured by the Vickers method for the wear disk.  Wear rate was measured for all samples. The results showed that the neat epoxy composite was more affected by the alkali solution, followed neutral solution, and then the acidic solution by increasing the radius of wear disk (3, 5, 7, 9, and 11) cm, t= 15 min. and the load 5 N. In contrast to the composite material that was more affected by the alkali solution than the acid, neutral solution.

Downloads

Download data is not yet available.

References

F.C. Campbell, Structural Composite Materials- ASM International, "Introduction to Composite Materials - Chapter 1", 2010, pp. 1-10.

Ahmed Abdelbary, "Wear of Polymers and Composites", Science Direct, Book, 2015, pp. 37-66.

Y. Şahin and H. Mirzayev, “Wear Characteristics of Polymer-Based Composites", Mechanics of Composite Materials, Vol. 51, Issue 5, pp. 543 - 554, 2015.

Selim Gürgen, Dinçer Tali, and Melih Cemal Kushan, "An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718", J. Aerosp. Technol. Manag., Vol.11, e1319, pp.1-10, 2019.

DC Sarrett, D P Coletti, A R Peluso, "The effects of alcoholic beverages on composite wear ", National Library Of Medicine, Vol. 1, No.16, pp. 62-67, 2000.

Fernanda Regina Voltarelli, Claudia Batitucci dos Santos-Daroz, Marcelo Corrêa Alves, Andrea Nóbrega Cavalcanti, Giselle Maria Marchi, "Effect of chemical degradation followed by tooth brushing on the surface roughness of restorative composites”, J. Appl. Oral Sci., Vol.18, No.6, pp. 585-590, 2010.

Ji-Deok Moon, Eun-mi Seon, Sung-Ae Son, Kyoung-Hwa Jung, Yong-Hoon Kwon, and Jeong-Kil Park, "Effect of immersion into solutions at various pH on the color stability of composite resins with different shades", Restor Dental Endod, Vol. 40, No. 4, pp.270-276, 2015.

Daniel Pink, Agata Walczak, Agata M. Niewczas, "Comparative Study of Wear Resistance of the Composite with Microhybrid Structure and Nanocomposite", Acta Mechanica et Automatica, Vol.10, Issue 4, pp. 306-309, 2016.

AM Amaro, PNB Reis, MA Neto, and C Louro, “Effect of different acid solutions on glass/ epoxy composites", Journal of Reinforced Plastics and Composites, Vol. 32, Issue 14, pp. 1018-1029, 2013.

Bin Wang, Chenggao Li, Weiyu Cao, "Effect of Immersion in Water or Alkali Solution on the Structures and Properties of Epoxy Resin”, Polymers, Vol.13, No. 1902, pp.1-14, 2021.

Liangfei Wu, Zhaozhu Zhang, Junya Yuan, Mingming Yang, Xuehu Men, Fang Guo, "A comparative study on wear and friction characteristics of phenolic composite coatings filled with different morphologies ZnO ", Vol.30, Issue 5, pp. 1173-1181, 2019.

Nadia. A. Ai, Seenaa I. Hussein, Mohammed K. Jawad, Ikram A. AL-Ajaj, "Effect of Al2O3 and SiO2 Nanoparticle on Wear, Hardness and Impact behavior of Epoxy composites", Chemistry and Materials Research, Vol.7, No.4, pp.34-39, 2015.

Salma M. Hassan, Aseel A. Kareem, Harith I. Jafaar, "Study the effect of acid immersion on the hardness of (Epoxy – Granite) composite", Baghdad Science Journal, Vol.11, No. 2, pp. 704-706, 2014.

A. M. Amaro, P. N. B. Reis, M. A. Neto; C. Louro, "Effects of alkaline and acid solutions on glass/epoxy composites", Polymer Degradation and Stability. 98 (4), pp. 853-862, 2013.

Ana Carolina Cabral Roque, Lauren Oliveira Lima Bohner, Ana Paula Terossi de Godoi, Vivian Colucci, Silmara Aparecida Milori Corona, Alma Blásida Concepción Elizaur Benitez Catirse, "Surface Roughness of Composite Resins Subjected to Hydrochloric Acid", Brazilian Dental Journal, Vol.26, No.3, pp. 268-271, 2015.

G. Edwardian, A. A. Sharaf, A. Mahmoud, "Evaluation of color change and surface roughness of two resin-based composites when exposed to beverages commonly used by children: an in-vitro study”, European Archives of Paediatric Dentistry, pp. 267-276, 2019.

Downloads

Published

2022-03-31

How to Cite

Hilal, R. H. (2022). Chemical Immersion Effects on Wear Property of Epoxy Reinforced Copper Powder Composites. Journal of Techniques, 4(1), 39–44. https://doi.org/10.51173/jt.v4i1.444

Issue

Section

Engineering

Similar Articles

<< < 1 2 3 4 5 6 7 8 > >> 

You may also start an advanced similarity search for this article.