تقييم إمكانية تطبيق بنود المواصفة (ISO 45001:2018) في عدد من تشكيلات وزارة الإعمار والإسكان والبلديات العامة: بحث مقارن

Ali Abbas Fadel; Azzam Abdel Wahab Abdel Karim

doi:10.51173/jt.v4i4.916

Authors

Ali Abbas Fadel Technical College of management - Baghdad, Middle Technical University, Baghdad, Iraq.
Azzam Abdel Wahab Abdel Karim Technical Institute for Administration, Middle Technical University, Baghdad, Iraq

DOI:

https://doi.org/10.51173/jt.v4i4.916

Keywords:

Occupational Health And Safety Management, International Standard (Lso 45001:2018)

Abstract

The current research aims to determine the differences between the actual reality of occupational health and safety management in the formations of the Ministry of Construction and Housing and public municipalities and the requirements of the occupational health and safety management system in accordance with the international standard (ISO 45001: 2018)، and this is done by identifying strengths to strengthen them and indicating areas for improvement to be exploited in system improvement processes Occupational Health and Safety Department، in addition to identifying the difference in the level of application of the requirements of the specification (ISO 45001: 2018) in the investigated formations، the researcher worked on preparing a checklist as the main tool for this study، and after presenting it to a group of arbitrators specialized in this field، it was conducted Measuring the gap by conducting field inspection، direct observation and personal interviews with a number of administrative leaders responsible for implementing the provisions of this specification in the formations affiliated with the Ministry of Construction and Housing and Public Municipalities، which are represented by (3) formations representing (Roads and Bridges Department، Works and General Maintenance Department and Al-Mansour Contracting Company Ltd.).

Therefore، the study reached a set of conclusions،the most important of which was that Al-Mansour Contracting Co. Ltd. obtained the highest degree in applying the provisions of the international standard (ISO 45001: 2018) amounting to (78.3) and the size of the gap amounted to (21.7%)، followed in order by (Department of Roads and bridges، where it was obtained at the level of application (48.3%) and the percentage of the size of the gap reached (51.7%). As for the Department of Public Works and Maintenance، the percentage of application reached (43.3%) and the percentage of the size of the gap reached (56.7%).and the results can be compared using other methods such as large binary models and hybrid models.

Downloads

Download data is not yet available.

References

Burton، J.، & World Health Organization. (2016). WHO Healthy Workplace Framework and Model: Background and Supporting Literature and Practices، 2010. WHO: Geneva، Switzerland.

Phoya، S. (2012). Health And Safety Risk Management On Building Constuction Sites In Tanzania: The Practice Of Risk Assessment، Communication And Control. Licentiate Thesis. Chalmers University Of Technology.

Kaustell، K. O. (2020). Assessment of occupational safety determinants in Finnish agriculture and commercial fishing. (Doctoral dissertation، University of Helsink

Quinlan، M. (1997). The toll from toil does matter: Occupational health and labour history. Labour History، 1-29.‏

Greepherson، A. (2013). The impacts of the health and safety programme on the organization performance: a case study of Arusha Airport Authority. A Research Dissertation Submitted In Partial Fulfillment Of The Requirements For The Degree Of Master Of Human Resource Management Of The Open University Of Tanzania.

Cooney، J. P. (2016). Health and safety in the construction industry-a review of procurement، monitoring، cost effectiveness and strategy (Doctoral dissertation، University of Salford).

Dejahang، M. (2015). Australian Industrial and Construction Injuries، Diseases and Fatalities; and Recommendations for Safety Practices (Doctoral dissertation، Curtin University).‏

Noe، R.، Hollenbeck، J.، Gerhart، B.، & Wright، P. (2014). Ebook: Fundamentals of Human Resource Management. McGraw Hill.‏

DeCenzo، D. A.، Robbins، S. P.، & Verhulst، S. L. (2016). Fundamentals of human resource management

Hudson، P. T. W. (2001). Safety management and safety culture: the long، hard and winding road. Occupational health and safety management systems، 3-32.

Mattson، M. (2015). Promoting safety in organizations: The role of leadership and managerial practices (Doctoral dissertation، Department of Psychology، Stockholm University).

Heras-Saizarbitoria، I. (Ed.). (2018). ISO 9001، ISO 14001، and new management standards. Springer International Publishing.‏

Shehadeh، Ahmed Taher Ahmed، (2019)، “The Impact of the Application of International Standards for Occupational Safety and Health OHSAS 18001 on the Behavior of Organizational Citizenship (A Field Study on Major Municipalities in the Gaza Strip)”، Master’s Thesis، The Islamic University – Gaza.

Yildiz، G. (2011). Developing a Health، Safety and Environment (HSE) management performance

Çalış، S.، & Büyükakıncı، B. Y. (2019). Occupational health and safety management systems applications and a system planning model. Procedia Computer Science، 158، 1058-1066.‏

Diugwu، I. A. (2008). A framework to evaluate critically the health and safety strategies in supply chains in the UK (Doctoral dissertation، Coventry University، UK).‏

Al-Musawi، Alwan، Ali Saad، (2020)، (evaluating the requirements for implementing the international standard lSO45001:2018 for the occupational health and safety management system (case study in a Wasit weaving and knitting factory)، a master’s thesis، College of Administration and Economics، Al-Mustansiriya University – Baghdad.